Sherwood RD-8504 Operating Instructions Manual page 55

RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오
Continued
3.
Press the CURSOR LEFT/RIGHT buttons to select the desired digit.
• Then the cursor moves to the desired digit.
4.
Press the CURSOR UP/DOWN buttons to enter the desired character on the selected digit.
• You can enter the desired among blank, A~Z, a~z, 0~9, (, ),
5.
Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits.
■To resume its factory input source name
• Enter a blank on each digit.
6.
To confirm your entry, press the CURSOR RIGHT button to select the Finish, then press the ENTER button.
• The name is stored in the memory.
■To clear the name you entered
• Press the CURSOR LEFT button to select the Cancel, then press the ENTER button.
11:36 페이지 55
+
, ,, ― , ., /.
55