Sherwood RD-8504 Operating Instructions Manual page 12

RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오
■ SETUP mIC JACk
• To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When
selecting the Auto Setup" on page 43.)
■Notes:
• Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than
the one supplied with this receiver.
• After you have completed the auto setup procedure, disconnect the microphone.
■ FRONT AUx IN JACk
• The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc.
■ Note :
• When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.
■
VIDEO 4 IN JACkS
• The VIDEO 4 IN jacks may be also connected to an additional video
component such as a camcorder, a video game player, etc.
■ Note:
• When not using the VIDEO 4 IN jacks, cover them with the supplied cap.
11:36 페이지 12
12