Disassembly And Assembly - Pride Mobility VICTORY SPORT Owner's Manual

V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into several
pieces: the seat, the front section, the rear section,
the battery shroud, the basket, and the batteries.
See figure 21. No tools are required to
disassemble or assemble your scooter, but keep
in mind that the disassembled sections of the
scooter take up more floor space than the
assembled unit. Always disassemble or assemble
your scooter on a level, dry surface with
sufficient room for you to work and move around
your scooter–about 1.5 meters (5 feet) in all
directions. Remember
components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond
your physical capability. Ask for
assistance
while disassembling
assembling your scooter.
1. Remove the seat by lifting it straight up and
off of the scooter. If you encounter resistance
when removing the seat, disengage the seat
rotation lever and swivel the seat back and
forth while lifting up on the seat.
2. Gently pull the battery shroud forward and
off of the scooter.
3. Disconnect the battery tie-down strap.
4. Unplug both battery harnesses by pulling
each harness straight up. See figure 22.
5. Remove the batteries from the battery wells.
6. Disconnect both front-to-rear harnesses. See
figure 22.
WARNING! Failure to unplug both
battery harnesses
separating the front and rear
sections
permanent
scooter.
Victory Sport
that some scooter
when necessary
or
prior to
could result in
damage to the
www.pridemobility.com
FRONT SECTION
BASKET
Figure 21. Scooter Components
BATTERY HARNESS CONNECTIONS
BATTERY TIE-DOWN STRAP
Figure 22. Harness Connections
SEAT
REAR SECTION
BATTERIES
BATTERY SHROUD
35