Precor P10 Operating And Maintaining page 70

24
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815
11. Attach the cable to the appropriate connector inside the
12. Repeat steps 7 through 9 for the remaining cables you
base of the EFX, as shown in the following illustration and
table.
Important: Install coaxial cable using a torque wrench and
torque to not exceed 8 lb-in. If a torque wrench is not
available, install the coaxial cable using a wrench to "snug +
¼ turn." It is permissible to use a wrench on the internal nut
to aid the tightening process.
Figure 6: Cable connection points inside EFX base
Connect ...
The console power cable (red
and black, individual leads)
The television cable (black and
round)
The Ethernet cable (black and
flat)
want to install.
To ...
The power connector on the jack
panel
The coaxial connector on the
jack panel
The eight-connector modular
jack on the jack panel