Removing The Motherboard - HP PAVILION Pavilion ZE4300 Service Manual

Removing the Motherboard

(Authorized Service Providers Only)
NOTE: This section applies only to HP Pavilion ze4x00, HP nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
NOTE: Before Replacing the Motherboard
If possible, record the computer's electronic serial number before you replace the motherboard. You will
then store the electronic serial number in the EEPROM on the new motherboard using the Service Utility
floppy disk.
1. Download the notebook service package from the Partnership Web site (see page vii), and then
create a Service Utilities floppy disk as described in the package's Readme file.
2. Plug in an AC adapter.
3. Insert the Service Utilities floppy disk in the floppy drive.
4. Turn on the notebook. When the HP logo appears (on either the built-in display or the
external monitor), press
boot from the floppy disk.
5. Select the Serial Number option from the boot menu.
6. When prompted, type
the old motherboard on the floppy disk.
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
• Hard disk drive (page 2-9)
Keyboard cover (page 2-13)
•
• Keyboard (page 2-16)
• CD/DVD drive (page 2-20)
Display assembly (page 2-23)
•
Top case (page 2-26)
•
• Floppy drive (page 2-32)
• Heat sink (page 2-40)
2-50 Removal and Replacement
to display the boot menu, and then choose Removable Device and
esc
for the automatic update option. This stores the current system data from
A
Service Manual