Memory Module - HP PAVILION DV3000 Maintenance And Service Manual

Memory module

Description
For use in dv3000 computer models:
2048-MB (667-MHz, PC2-5300, DDR2)
1024-MB (667-MHz, PC2-5300, DDR2)
512-MB (667-MHz, PC2-5300, DDR2)
For use in dv3500 computer models:
4096-MB (667-MHz, PC2-6400, DDR2)
2048-MB (667-MHz, PC2-6400, DDR2)
1024-MB (667-MHz, PC2-6400, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the memory module
compartment cover to the computer.
2. Lift the rear edge of the cover (2), swing it up and forward, and remove the cover. The memory
module compartment cover is included in the Plastics Kit, spare part number 468821-001 for
dv3000 models, 501013-001 for dv3500 models.
3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page 43).
Spare part number
448151-003
448150-002
452312-002
496112-001
496111-001
496110-001
Component replacement procedures 49