System Board - HP PAVILION DV3000 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
Description
System board for use only in dv3000 models (includes replacement thermal material and power
connector cable)
System board for use only in dv3500 models (includes replacement thermal material and power
connector cable)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Switch cover (see
e. Top cover (see
f. Display assembly (see
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
WLAN module (see
●
Memory modules (see
●
RTC battery (see
● Modem module (see
● Heat sink (see
●
Processor (see
●
Fan (see
70 Chapter 4 Removal and replacement procedures
Battery on page
Optical drive on page
Hard drive on page
Keyboard on page
Switch cover on page
Top cover on page
Display assembly on page
WLAN module on page
Memory module on page
RTC battery on page
Modem module on page
Heat sink on page
Processor on page
Fan on page 84)
43).
48)
51)
54)
57)
58)
63)
45)
49)
77)
79)
80)
82)
Spare part number
468499-001
496097-001