Top Cover - HP PAVILION DV3000 Maintenance And Service Manual

7. Remove the switch cover (3).
Reverse this procedure to install the switch cover.

Top cover

Description
Top cover for dv3000 models (includes TouchPad and cable, fingerprint reader board cable, and
caps lock LED board and cable)
Top cover for dv3500 models (includes TouchPad and cable, fingerprint reader board cable, and
caps lock LED board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
58 Chapter 4 Removal and replacement procedures
Battery on page 43).
Hard drive on page 51)
Optical drive on page
Keyboard on page 54)
Switch cover on page
48)
57)
Spare part number
468819-001
501011-001