Connecting An A/V Receiver, Sdtv, And Vcr/Dvd Recorder - Motorola RNG200N User Manual

Connecting Your RNG Set-top

Connecting an A/V Receiver, SDTV, and VCR/DVD Recorder

1. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the RNG set-top
and the input L/R connectors on the A/V receiver.
2. Connect an S-Video cable to the SVIDEO connector on the RNG set-top and the S-
Video connector on the A/V receiver.
3. Note: If your A/V Receiver does not support S-Video connections, Composite video
connections may be used in place of the S-Video connection.
4. Connect a stereo audio cable to the VCR audio out L/R connectors on the A/V
receiver and the input audio L/R connectors on the stereo VCR.
5. Connect a stereo audio cable to the output audio out L/R connectors on the stereo
VCR and the VCR audio in L/R connectors on the A/V receiver.
6. Connect a composite video cable to the input video connector on the stereo VCR
and the video VCR out connector on the A/V receiver.
7. Connect a composite video cable to the output video connector on the stereo VCR
and the video VCR in connector on the A/V receiver.
8. Connect an S-Video cable to the input S-Video connector on the Standard-Definition
TV (SDTV) and the TV/monitor output S-Video connector on the A/V receiver.
Note: If your TV or A/V receiver does not support S-Video connections, Composite
connections may be used in place of the S-Video connections.
Note: The digital audio optical (optical S/PDIF) or digital audio (COAXIAL S/PDIF) audio
outputs may be used in place of the stereo audio outputs (audio L/R). These outputs
offer a higher level of audio quality, including support for Dolby Digital audio.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting HDTV — Single Connection for Video/Audio.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
B
19