Connecting An A/V Receiver, Sdtv, And Vcr/Dvd Recorder - Motorola RNG150N User Manual

Connecting an A/V Receiver, SDTV, and VCR/DVD Recorder

1. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the RNG set-top
and the INPUT L/R connectors on the A/V receiver.
2. Connect a composite video cable to the composite video out connector on the RNG
set-top and the composite video connector on the A/V receiver.
3. Connect a stereo audio cable to the VCR/DVD recorder audio out L/R connectors on
the A/V receiver and the input audio L/R connectors on the VCR/DVD recorder.
4. Connect a stereo audio cable to the audio out L/R connectors on the VCR/DVD
recorder and the VCR audio in L/R connectors on the A/V receiver.
5. Connect a composite video cable to the input video connector on the VCR/DVD
recorder and the composite video VCR out connector on the A/V receiver.
6. Connect a composite video cable to the composite video out connector on the
VCR/DVD recorder and the video VCR in connector on the A/V receiver.
7. Connect a composite video cable to the composite video connector in on the
Standard-Definition TV (SDTV) and the TV/monitor composite video out connector on
the A/V receiver.
Note: The digital optical audio (optical S/PDIF) or digital coaxial audio (COAXIAL S/PDIF)
outputs may be used in place of the stereo audio outputs (audio L/R). These outputs
offer a higher level of audio quality, including support for Dolby Digital audio.
Note: If the TV does not support composite video connections, use the RF out connector
on the RNG set-top. The RF connection carries video and audio.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting an HDTV — Single Connection for
High-Definition Digital STB RNG150N • User Guide
365-095-17388-x.2
Video/Audio.
B
21