Native Mode Settings Screen - Motorola RNG200N User Manual

Configuring A/V, Closed Captioning, and Other Settings

Native Mode Settings Screen

The Native Mode Settings menu is used to configure the operation of the native mode
feature on the RNG200N. The RNG200N is capable of receiving and decoding a number
of different digital video formats. When operating in native mode, the RNG200N will
generate a video output format that most closely matches the broadcast video format .
For example, if the RNG200N is configured to operate in native mode, a channel
broadcast in the 720p format will be output to the television in the 720p format, while a
channel broadcast in the 1080i format will be output to the television in the 1080i format.
When using the native mode feature of the RNG200N, please exercise caution when
selecting the formats from the checklist. If a format is selected that is not compatible
with the television, there may be a loss of video whenever the RNG200N is tuned to a
channel which is broadcast in that format.
If the television is connected to the RNG200N using an HDMI cable, the RNG200N will
automatically customize the checklist of supported formats as reported to it by the
television. If the television is connected to the RNG200N using Component Video
(YPbPr) cables, the checklist will need to be customized manually. Note that at least one
of the [1080p - 1080i – 720p – 480p – 480i] formats must be selected from the checklist
for the RNG200N to operate properly in native mode.
The Native Mode Settings menu screen is illustrated and defined below.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
Native Mode Settings menu screen
B
32