Connecting To A Device And Configuring Network Settings; Figure 3-2 Ip Utility User Interface - Honeywell HD4DIP Reference Manual

Connect /
disconnect icon
Discovery icon
Limited or No
connectivity
The Discovery pane lists
the IP devices found on
the network and groups
by device type
Enable or disable
HTTP Server

Connecting to a Device and Configuring Network Settings

Document 800-04191 Rev A
06/09
Figure 3-2 IP Utility User Interface
When you log on to the IP Utility, the devices on the network—including the devices on
other subnets—are automatically discovered and are listed in the Discovery pane. After the
initial discovery, auto-refresh continues to discover devices that are newly added or
removed from the network.
You can also manually refresh the device discovery by clicking the Discovery icon
located near the top of the Discovery pane.
HD4DIP Network Camera V2.1 Reference Guide
The About menu displays the
software version installed
The Status bar displays how many devices
are on the network, which one you are
connected to, and which user is logged on.
From the User tab,
Administrators can change the
Web-Client user passwords
IP Network Setting assigns
network settings
automatically or manually
Upgrade Firmware
downloaded from the
Honeywell web site
,
37