Ac Applications - Chicago Electric 67561 Set Up, Operating, And Servicing Instructions

AC AppliCATions

1. Before connecting an appliance or
power cord to the generator: Make sure
that it is in good working order. Faulty
appliances or power cords can create a
potential for electrical shock.
2. If an appliance begins to operate
abnormally, becomes sluggish or
stops suddenly, turn it off immediately.
Disconnect the appliance, and determine
whether the problem is the appliance, or
if the rated load capacity of the generator
has been exceeded.
3. Make sure that the electrical rating of
the tool or appliance does not exceed
that of the generator. Never exceed the
maximum power rating of the generator.
Power levels between rated and
maximum may be used for no more than
30 minutes.
4. Substantial overloading will open the
circuit breaker. Exceeding the time limit
for maximum power operation or slightly
overloading the generator may not switch
the circuit breaker or circuit protector
OFF, but will shorten the service life of
the generator.
sERviCE pRECAuTions
1. Before service, maintenance, or
cleaning:
a. Turn the engine switch to its "off"
position.
b. Allow the engine to completely cool.
c. Then, remove the spark plug wire(s)
from the spark plug(s).
2. Keep all safety guards in place and in
proper working order. Safety guards
include muffler, air cleaner, mechanical
guards, and heat shields, among other
guards.
SKU 67561 for technical questions, please call 1-800-444-3353.
3. Do not alter or adjust any part of the
equipment or its engine that is sealed
by the manufacturer or distributor.
Only a qualified service technician
may adjust parts that may increase or
decrease governed engine speed.
4. Wear ANSI-approved safety goggles,
heavy-duty work gloves, and dust mask/
respirator during service.
5. Maintain labels and nameplates on
the equipment. These carry important
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
6. Have the equipment serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the equipment
is maintained. Do not attempt any
service or maintenance procedures
not explained in this manual or any
procedures that you are uncertain about
your ability to perform safely or correctly.
7. Store equipment out of the reach of
children.
8. Follow scheduled engine and equipment
maintenance.
9. Refueling Precautions:
a. Do not smoke, or allow sparks, flames,
or other sources of ignition around the
equipment, especially when refuelling.
b. Do not refill the fuel tank while the
engine is running or hot.
c. Do not fill fuel tank to the top. Leave
a little room for the fuel to expand as
needed.
d. Refuel in a well-ventilated area only.
sAvE ThEsE
insTRuCTions.
Page 6