Specifications; Safety Warnings And Precautions - Central Pneumatic 97525 Assembly And Operating Instructions Manual

Central pneumatic air nailer/stapler 2-in-1 kit
Table of Contents

Advertisement

Air Inlet
Recommended Air Pressure
Magazine Capacity
Safety Feature
Nail Size
Staple Size
Accessories
Note: Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect tool
performance.
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean
2.
Observe work area conditions
wet locations. Do not expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gases or liquids.
Keep children away
3.
them handle machines, tools, extension cords, or air hoses.
4.
Store idle equipment
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job
to do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6.
Dress properly
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7.
Do not overreach
or across running machines or air hoses.
SKU 97525
For technical questions, please call 1-800-444-3353.
40115

Specifications

1/4" - 18 NPT
60 - 100 PSI, 100 PSI Max.
100 Nails or 80 Staples
Single Sequential Safety Trip Mechanism
.039-.042" Shank (18 Gauge),
/
" Crown, .039-.042" Shank (18 Gauge),
1
4
Oil Dropper, 2 Wrenches, 1 Coupler Plug
Save This Manual

Safety Warnings and Precautions

. Cluttered areas invite injuries.
. Do not use machines or power tools in damp or
. Children must never be allowed in the work area. Do not let
. When not in use, tools must be stored in a dry location to
. Do not attempt to force a small tool or attachment
. Do not wear loose clothing or jewelry as they can be caught in
. Keep proper footing and balance at all times. Do not reach over
/
" - 1-
/
" L
5
1
8
4
/
" - 1-
/
" L
1
1
2
4
Page 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40115

Table of Contents