Advertisement
Nail Size
Magazine Capacity
Air Inlet
Recommended Air Pressure
Maximum Air Pressure
Safety Feature
This Nailer Features an Adjustable Depth Mechanism, see page 10.
* The air pressure setting must not exceed job site regulations/restrictions. The air
pressure setting must not exceed 90 PSI when being used with work pieces that have
a thickness of less than 1-3/4".
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, extension cords, or air hoses.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate for which it was intended.
Do not modify this tool and do not use this tool for a purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.
8.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before attaching to an air source.
SKU 46240-B
Specifications
Save This Manual
Safety Warnings and Precautions
For technical questions, please call 1-800-444-3353.
28
o
, 0.113" - 0.131" Diameter
(8-10 Gauge), 2" - 3-1/2" long
Clipped Head Nails
90
1/4"- 18 NPT
60-125 PSI *
100 PSI
Full Sequential Safety Trip Mechanism
REV 11/06
Page 2
Advertisement
