Installation; Specifications - Central Pneumatic 68247 Owner's Manual & Safety Instructions

Specifications

Air Inlet and Outlet Size

installation

read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
note: This air tool may be shipped with protective plugs covering the air ports. Remove these plugs before set up.
tO prEVEnt SEriOUS inJUry FrOM EXplOSiOn:
Use only clean, dry, regulated, compressed air to power this tool.
Do not use oxygen, carbon dioxide, combustible gases,
or any other bottled gas as a power source for this tool.
Functions
regulator Handle
Page 4
Operating Pressure 0 -160 PSI
Inlet: 1/2" -14 NPT (female thread)
Outlet: 1/4" - 18 NPT (male thread)
Features Replaceable air filter element
Filter 40 micron
regulator
Gauge
For technical questions, please call 1-888-866-5797.
air inlet port
Drain plug
air Valve
tank
Item 68247