Setting Up - Os/2; Using The Axis Print Utility For Os/2; Section 6 Setting Up - Os/2 - Axis 540 User Manual

Section 6 Setting Up - OS/2

Using the AXIS Print Utility for OS/2

AXIS 540/640 User's Manual
Having connected the AXIS 540/640 to your network, this section
now describes how to set up your AXIS 540/640 for printing in the
OS/2 environment.
If you intend to operate your AXIS 540/640 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - NetWare
Section 5 Setting Up - Windows
Section 7 Setting Up - Macintosh
Section 8 Setting Up - UNIX
Section 9 Web Based Management
The installation and setup operations are performed with the AXIS
Print Utility for OS/2. You should install this utility now if you have
not already done so - see the instructions on the OS/2 Utilities disk
label.
Should you require to change the default name of your AXIS 540/640
or amend any of default parameters, use the AXIS NetPilot™ from
any Windows platform that is connected to your network, or
WinOS/2 window under OS/2.
The AXIS Print Utility for OS/2 is not needed on the client platforms
when using a client-server configuration.
Section 6: Setting Up - OS/2
73