Mac Clone; Alg Settings - TP-Link TD-W8980 User Manual

N600 wireless dual band gigabit adsl2+ modem router

Table of Contents

TD-W8980

Click the Save button to save the settings.

4.5.5 MAC Clone

Choose menu "Network" "MAC Clone", you can configure the MAC address of the WAN

Interface as shown below.

The WAN Interface List displays the Lay2 Interfaces you have configured on the section

WAN Settings

and its default MAC Address. You can select corresponding WAN Interface from the

drop-down list and click Clone MAC To button to clone your current PC MAC, and then click

Save.

Note:

Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not

be the same with each other.

Choose menu "Network" "ALG Settings", and then you can configure the basic security in the

screen as shown in Figure 4-19.

Virtual Private Network (VPN): VPN Passthrough must be enabled if you want to allow VPN

tunnels using VPN protocols to pass through the modem router.

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

Figure 4-18

Figure 4-19

4.5.1

Table of Contents