Connecting A Computer Using The Ethernet Cable - THOMSON TG797 Setup And User Manual

3 Adding a New Computer to your Network
3.1

Connecting a Computer Using the Ethernet Cable

Requirements
Your computer must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1 Connect one end of the Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson Gateway:
2 Connect the other end of the Ethernet cable to your computer.
3 Your computer is now connected to your network. No additional configuration is needed.
22
E-DOC-CTC-20080421-0018 v1.0