Connecting A Computer Using Ethernet - THOMSON 585 v7 Setup And User Manual

3 Adding New Devices to your Network
3.1.2

Connecting a computer using Ethernet

Requirements
Your computer must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Procedure
Proceed as follows:
1 Connect one end of the (yellow) Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson
Gateway:
2 Connect the other end of the (yellow) Ethernet cable to your computer.
3 Your computer is now connected to your network. No additional configuration is needed.
22
E-DOC-CTC-20080118-0003 v1.0