Mounting The Optional Dect Cradle - THOMSON TG797 Setup And User Manual

1.2

Mounting the Optional DECT Cradle

Introduction
The DECT cradle allows you to seamlessly integrate your DECT phone into your Thomson Gateway.
Mounting the docking station on the Thomson Gateway
Proceed as follows:
1 On the bottom of you device, remove the overlay covering the DECT slot.
2 Insert the DECT cradle in the DECT slot.
3 The DECT cradle is now ready for use. You can now recharge the batteries of your DECT phone by placing
it in the cradle.
Can I start making phone calls now?
No, first you have to complete the installation of your Thomson Gateway and then your have to register your
DECT phone. For more information about registering DECT phones, see
Your Thomson Gateway" on page
E-DOC-CTC-20080421-0018 v1.0
33.
1 Installation
"5.2 Connecting a DECT Phone to
5