Setting Up The Zotac Zbox Nano Xs - Zotac zbox nano xs User Manual

Setting up the ZOTAC ZBOX nano XS

Please connect the peripherals before using the ZOTAC ZBOX nano XS.
1
1. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel and
the other end to an HDMI-compatible display such as an HDTV or monitor.
2. Connecting to a home network
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
3. Connecting USB 3.0 device
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to
the USB 3.0 port.
4. Connecting a mni-DisplayPort display
Connect the mini-DisplayPort connector to the mini-DP port of the monitor or display.
5. Connecting the Wi-Fi antenna
Connect the Wi-Fi antenna to the Wi-Fi antenna connector.
6. Connecting the power adapter and turning on the ZBOX nano XS
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
2
3
4
5
6
ZOTAC ZBOX nano XS
13