Thread Needle - Bernina 530 User Manual

Sewing preparation
18

thread needle

a
B
a
changing the presser foot sole
Position the needle upper by pressing the foot control once
(1 stitch).
raise needle
█
lower presser foot
█
turn power switch to «0» (off)
█
hold thread to the left and back
█
press lever a down and hold it
█
guide thread around the hook B to the right in front of the needle
█
c
put the thread from the front into the guide c until it catches in the wire
█
hook
release lever a
█
►
needle is threaded
pull the thread to the back and
█
D
put the thread under the foot and pull it from front to back over the thread
█
cutter on left side of the head frame D, cut
Threads release automatically as soon as the first stitch is sewn.
remove presser foot sole
raise the needle and presser foot
█
turn power switch to «0» (off)
█
press the button on the shaft
█
►
the sole is released
attaching the presser foot sole
place the presser foot sole under the shaft
█
the peg sits under the opening of the shaft
█
lower the presser foot lifter
█
►
the foot sole will click into position
033471.52.04_2014-02_Manual_B530_550_EN