Manual Darning - Bernina 530 User Manual

manual darning

1
3
Darning foot no. 9 */**
Straight stitch no. 1
Holes or worn areas
«Replacing» threads along the lengthside and crosswise in every material.
preparation
█
█
█
►
Sewing
̶ work from the left to the right, guide the fabric evenly without using
̶ move in curves when changing direction on top and on bottom. Avoid
̶ work in different length so the thread is better spread over the fabric
1 Sew the first rows to cover the hole
█
█
█
2 Sew over the first rows
█
█
2
3 finish darning the hole
█
033471.52.04_2014-02_Manual_B530_550_EN
lower the feed dog
attach slide-on table
hoop the sewing project plus stabilizer into the darning hoop (optional
accessory)
the darning area stays evenly taut and cannot be distorted
pressure
points as this can cause holes and thread breakage
first rows just beyond the worn area and not too close together
work the rows in irregular lengths
turn fabric by a quarter turn -90°
first rows not too close
turn fabric by half turn -180°
sew another loose row
poor stitch formation
̶ if the thread is lying on top, slow down the fabric movement
̶ if there are knots on the wrong side of the fabric, move the fabric
more quickly
thread breaks
Guide the fabric with a more consistent speed.
practical stitches
43