BSr
68
functions in the BSr mode
needle stop down (default)
►
the arrow points down on the BSR-Display
►
the sewing computer stops with needle down, when taking foot off foot
control or engaging the «Start/Stop»-button
needle stop up
press the «Needle stop»-button
█
►
the arrow points up
►
the sewing computer stops with needle up, when taking foot off foot control
or engaging the «Start/Stop»-button
raise or lower the needle
press «Needle stop»-button
█
►
to raise or to lower the needle
Securing with the «Start/Stop»-button (only mode 1)
place the fabric under the presser foot
█
lower presser foot
█
press the «Needle stop»-button twice
█
►
the lower thread is brought up
hold upper and lower thread
█
press the «Start/Stop»-button
█
►
BSR mode is activated
sew 5-6 securing stitches
█
press the «Start/Stop»-button
█
►
BSR mode is deactivated
cut threads
█
press the «Start/Stop»-button
█
►
BSR mode is activated
continue the stitching process
█
Securing function (only mode 2)
press the «Securing function»-button
█
press either the foot control or the «Start/Stop»-button
█
By moving the fabric some short securing stitches are sewn, then the set
stitch length will be activated and the securing function will be automatically
deactivated.
Beeper (acoustic Signal) activation/Deactivation
select the «Setup»-Program
█
select the icon «BSR Beep» via the «Navigation»-buttons
█
press the «OK»-button to confirm
█
select left icon
█
press «OK»-button to confirm
█
►
Beeper is activated
select right icon
█
press «OK»-button to confirm
█
►
Beeper is deactivated
press the «Back»-button
█
►
the main menu appears
press «BSR»-button
█
►
the BSR-Display appears (mode 1 or 2)
̶ when the Beeper is activated, the signal is heard as soon as the sewing
computer sews at maximal speed
̶ when the BSR mode is quit, the Beeper keeps the current setting (activated
or deactivated)
033471.52.04_2014-02_Manual_B530_550_EN