Sewing Preparation - Bernina 530 User Manual

Sewing preparation

12
foot control
Slide-on table
Before beginning to sew
█
█
a
█
Sewing speed control
Control the sewing speed by pressing the foot control more or less.
B
adjust needle down or up
█
D c
after sewing
█
█
1
█
►
█
►
The slide-on table increases sewing surface.
attaching the slide-on table
█
a █
removing the slide-on table
█
█
█
Seam Guide
█
Can be moved over the entire table length.
033471.52.04_2014-02_Manual_B530_550_EN
unwind the cable
plug the cable in the outlet provided a
unwind the cable to the desired length and slip into B or c
adjust the down/up position of the needle by sinking the heel back on the
foot control
wind the cable around the spool
plug cable into D
uSa/canada only: use only foot controller type LV-1 with
sewing computer B 530 and B 550 Qe.
turn the handwheel (see page 11)
needle is raised
raise presser foot lifter 1 up
presser foot is lifted
raise the needle and presser foot
slide over free-arm to the right until it engages
raise the needle and presser foot
press button a down
pull slide-on table to the left
press the release button and insert into the groove (underside of table) from
left or right