Table of Contents
Advertisement
STORAGE
1.
To store the UX2 AIR BIKE simply keep it in a clean dry place.
2.
The UX2 AIR BIKE is 42 1/2" long x 22 1/4" wide x 45 1/4" tall.
3.
The UX2 AIR BIKE must be lifted for movement. Two people may be required.
4.
To avoid damage to the electronics, remove the batteries before storing the UX2 AIR BIKE for one year
or more.
MAINTENANCE
The safety and integrity designed into the UX2 AIR BIKE can only be maintained when the UX2 AIR BIKE
is regularly examined for damage and wear. Special attention should be given to the following:
1.
Verify that the Thin Nuts(35) are properly tightened to prevent the pedals from coming loose.
2.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
3.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4.
Worn or damaged components shall be replaced immediately or the UX2 AIR BIKE removed from service
until repair is made. Only Stamina Products supplied components shall be used to maintain/repair the
UX2 AIR BIKE.
5.
Keep your UX2 AIR BIKE clean by wiping with an absorbent cloth after use.
IT IS NOT NECESSARY TO RETURN ENTIRE BIKE FOR A MONITOR REPAIR.
THE MONITOR IS REMOVABLE FROM BIKE FOR REPAIR OR REPLACEMENT.
PROBLEM
1.
No display on monitor.
2.
No speed or distance displays
on monitor.
3.
Chain makes popping noise.
4.
Bike makes sudden loud noise.
5.
Bike rocks as you pedal.
6.
Resistance too high.
TROUBLE SHOOTING GUIDE
CAUSE
1.
Batteries weak or dead.
1.
Pickup wire not connected to
monitor.
2.
Speed pickup not working
properly.
3.
Monitor not working properly.
1.
Chain is too loose.
1.
Chain is too loose and hits fan.
1.
Bike is not level.
1.
Fan needs adjustment.
14
CORRECTION
1.
Replace batteries. (Use two AA.)
1.
Securely plug pickup wire into
back of monitor.
2.
Replace speed pickup.
3.
Replace monitor.
1.
Adjust chain - See page 15 chain
adjustment.
1.
Adjust chain
1.
Adjust leveling caps on front
stabilizer until bike is level.
1.
Adjust fan per instructions on
page 15 and 16.
Hide quick links:
Advertisement
Table of Contents
