Feature
Block (Multi-Sector
Disabled
Transfer)
Auto
PIO Mode
Auto
0
1
2
3
4
DMA Mode
Auto
SWDMA0-2
MWDMA0-2
UWDMA0-5
S.M.A.R.T.
Auto
Disabled
Enabled
32Bit Data Transfer
Disabled
Enabled
9.5.2.3
Floppy configuration sub-menu
Table 45. BIOS Setup, Floppy Configuration Sub-menu Selections
Feature
Floppy A
Onboard Floppy Controller
9.5.2.4
Super I/O configuration sub-menu
Table 46. BIOS Setup, Super I/O Configuration Sub-menu
Feature
Options
Serial Port1 Address
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
40
Options
Disabled: The Data transfer from
and to the device occurs one sector
at a time.
Auto: The data transfer from and to
the device occurs multiple sectors at
a time if the device supports it.
Select PIO Mode.
Selcet DMA Mode.
Auto :Auto detected
SWDMA :SinglewordDMAn
MWDMA :MultiwordDMAn
UWDMA :UltraDMAn
S.M.A.R.T. stands for Self-
Monitoring, Analysis and Reporting
Technology.
Enable/Disable 32-bit Data Transfer
Options
Disabled
1.44 MB 3 1/2"
Disabled
Enabled
Help Text
Allows BIOS to Select Serial Port1
Base Addresses.
SE7221BK1-E Technical Product Specification
Help Text
Help Text
Select the type of floppy drive
connected to the system.
Allows BIOS to Enable or
Disable Floppy Controller.
Description
Option that is used by other serial port
is hidden to prevent conflicting
settings.
Description
The Auto setting should work in
most cases.
The Auto setting should work in
most cases.
The Auto setting should work in
most cases.
The Auto setting should work in
most cases.
Description
Note: Intel no longer
validates 720 Kb &
2.88 Mb drives.
Revision 1.3