Standalone; Automatic; Color Temperature Preset; Custom Color Temperature - Chauvet SlimPAR PRO VW User Manual

Standalone

This fixture has several options for operating without a DMX controller. Access these options via the
control panel on the back of the fixture.

Automatic

This fixture has preprogrammed chases that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
Please see the instructions below for details on entering this mode.
1.
2.
3.
4.
5.
6.
7.
8.
9.

Color Temperature Preset

This fixture has preprogrammed, static color temperature presets that may be triggered without a
controller. Access these chases via the control panel on the back of the fixture.
Please see the instructions below for details on entering this mode.
1.
2.
3.
4.
5.

Custom Color Temperature

This fixture has the ability to accept a custom static color temperature setting. Access this via the
control panel.
Please see the instructions below for further explanation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Using <UP> and <DOWN>, select the desired strobe value (
11. Press <ENTER> to save the final color setting. This will move the selection to the following
4. Operating Instructions
Remove any DMX controller from the fixture.
Press <MENU> to select Auto Program (
Press <ENTER>.
Using <UP> & <DOWN>, select one of the 5 programs.
Press <ENTER>.
~
Press <MENU> until
Press <ENTER>.
Using <UP> & <DOWN>, select the desired run speed (slow~fast)
Press <ENTER>.
Remove any DMX controller from the fixture.
Press <MENU> to select Color Temperature Preset mode (
Press <ENTER>.
Using <UP> & <DOWN>, select one of the nine presets.
Press <ENTER>.
Press <MENU> until appears on the LED screen.
Press <ENTER>.
Using <UP> and <DOWN>, select the desired color.
Press <ENTER>.
Using <UP> and <DOWN>, select the desired color value (
the color will remain off.
Press <ENTER> to continue to the next color (
Using <UP> and <DOWN>, select the desired color value (
Continue until the desired mix is obtained. The order of colors is warm white and cool white.
Press <ENTER> to continue to the strobe setting.
the strobe function will remain off.
color. However, this is necessary to save the modification.
13
).
appears on the LED screen.
).
~
).
~
). By selecting ,
).
~ ). By selecting ,
11/24/2010 4:15 PM