Internal Lan (Rj-45) Jack - Fujitsu LifeBook S710 User Manual

3
Click Phone and Modem. You may initially need to enter your area code in order to open the Phone and Modem
Options window.
4
Select the Modems tab, and click the [Properties] button.
5
Select the Modem tab and adjust the volume as necessary.
T
HE INTERNAL MODEM IS NOT INTENDED FOR USE WITH
THE INTERNAL MODEM TO A
MODEM OR YOUR ENTIRE
DOCUMENTATION FOR DETAILS
BEFORE
•
T
HE INTERNAL MODEM IS DESIGNED TO THE
53000
BPS IS THE HIGHEST ALLOWED BY
LINE CONDITIONS
•
T
HE INTERNAL MODEM ON ALL
U
THE NITED

Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/
100Base-Tx/1000Base-T) Ethernet LAN connection. You may
need to configure your notebook to work with your particular
network. (Contact your network administrator for information on
your network configuration.) To connect the LAN cable follow
these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Plug the other end of the cable into a LAN outlet.
D PBX
IGITAL
LIFEBOOK
. S
OME HOTELS HAVE
YOU CONNECT YOUR MODEM
. T
HE MAXIMUM SPEED IS
LIFEBOOK
S C . T
TATES AND ANADA
80
D PBX
IGITAL
AS IT MAY CAUSE SERIOUS DAMAGE TO THE INTERNAL
. C
NOTEBOOK ONSULT YOUR
D PBX
IGITAL
.
ITU-T V.90
STANDARD
FCC,
AND ITS ACTUAL CONNECTION RATE DEPENDS ON THE
33600
BPS AT UPLOAD
F
NOTEBOOKS FROM
HE MODEM MAY BE CERTIFIED IN OTHER COUNTRIES
Figure 26. Connecting the LAN
. D
SYSTEMS O NOT CONNECT
PBX '
MANUFACTURER S
. B
SYSTEMS E SURE TO FIND OUT
. I
TS MAXIMUM SPEED OF
.
UJITSU ARE CERTIFIED FOR USE IN
.