Replacing The Battery - Fujitsu LifeBook S710 User Manual

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay, follow these easy steps:
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
While pushing the battery bay release lock away from the battery pack, slide the battery release latch to the left.
This will release the battery and expose a bright orange lift point to lift the battery out of the bay.
4
Insert a new battery into the bay, and press it down so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
Battery Lock
1
Figure 14. Removing a Battery
63
2
Battery Release Button
Battery Pack