Boot Sequence
The procedure for starting up your notebook is termed the "bootup sequence" and involves your
notebook's Basic Input-Output System (BIOS). When your LIFEBOOK notebook is first turned on, the
main system memory is empty, and it needs to find instructions to start up your notebook. This information
is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence
which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is
performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is
completed without a failure and without a request for the BIOS Setup Utility, the system displays the
operating system's opening screen.
The boot sequence is executed when:
• You turn on the power to your LIFEBOOK notebook.
• You restart your notebook from the Windows Shut Down dialog box.
• The software initiates a system restart, such as when you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive. This feature
is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about
accessing the utility.
R
EMEMBER YOUR PASSWORDS
PASSWORDS
REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your LIFEBOOK
notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set
or change the BIOS environment to operate your notebook.
The BIOS Setup Utility configures:
. I
F YOU SET AND FORGET YOUR
, F
A
UJITSU
MERICA WILL NOT BE ABLE TO RESET IT
49
U
M
SER AND
ASTER HARD DISK
. Y
OU MAY LOSE DATA AND HAVE TO
.