Fujitsu LifeBook S710 User Manual page 93

Hide thumbs Also See for LifeBook S710:
Table of Contents

Advertisement

Available languages

Available languages

Problem
There is no sound coming
from the built-in speakers.
(continued)
DVD/CD-RW/CD-ROM Drive Problems
LIFEBOOK notebook fails
to recognize DVD/CD-
RW/CD-ROM's.
The drive access indicator
on the Status Indicator
Panel blinks at regular
intervals with no disc in the
tray or the drive is not
installed.
Possible Cause
Possible Solutions
The speakers have
Click on the Volume icon in the tool tray on the bottom right of the
been muted using the
screen. (It looks like a speaker). If the Mute box is checked, click
Volume icon in the sys-
on it to uncheck it. You can also use the [Fn+F3] key combination
tem tray.
to toggle the volume on and off. Pressing [F3] while holding [Fn]
will toggle the audio mute.
The disc is not pushed
Open optical drive tray and re-install the disc properly.
down onto raised center
circle of the drive.
Optical drive tray is not
Push on the front of the optical drive tray until it latches. If that
latched shut.
doesn't work, pull out the modular drive latch to remove the device
from the bay, then re-insert the drive until it latched; this ensures
that the drive is properly seated.
Incorrect DVD Player or
Install DVD Player software. (See "Media Player Software" on
no DVD Player software
page 66 for more information.)
is installed.
Wrong drive designator
Verify the drive designator used by the application is the same as
was used for the disc in
the one used by the operating system. When the operating sys-
the application.
tem is booted from a DVD/CD, drive designations are automati-
cally adjusted. Note that the drive designation can be changed
with the Disk Management tool located at Administrative Tools ->
Computer Management.
DVD/CD-RW/CD-ROM
Wipe the disc with a non-abrasive CD cleaning cloth and reinsert.
is dirty or defective.
It if still will not work try another DVD/CD-RW/CD-ROM in the
drive.
The Windows auto
This is normal. However, you may disable this feature.
insertion function is
active and is checking
to see if a disc is ready
to run.
87

Advertisement

Chapters

Table of Contents
loading

Table of Contents