Device Ports; Internal Lan (Rj-45) Jack; Universal Serial Bus Ports; Microphone Jack - Fujitsu MH380 User Manual

Device Ports

Your MH380 notebook comes equipped with multiple device ports to which you can connect an external
device including: disk drives, keyboards, modems, printers, etc.

Internal LAN (RJ-45) jack

The internal LAN (RJ-45) jack is used for an internal 10/100 BaseTx Ethernet connection. You will need
to configure your notebook to work with your particular network. (Please refer to your network
administrator for information on your network configuration.) To connect the LAN cable follow these
easy steps: (See Figure 5 on page 22 for location)
1
Align the connector with the jack opening.
2
Push the connector into the jack until it is seated.
3
Plug the other end of the cable into a LAN outlet.

Universal Serial Bus Ports

The three Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external floppy
disk drives, external DVD drives, game pads, pointing devices, keyboards and/or speakers. USB 2.0 is
downward-compatible with USB 1.1 devices, so older USB devices will work with these ports. USB 2.0
is a much faster design, running forty times faster than USB 1.1.
In order to connect a USB device, follow these easy steps: (See Figure 5 on page 22 for location)
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.

Microphone Jack

The microphone jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8"(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook.
In order to connect a microphone follow these easy steps: (Figure 5)
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
62 - Device Ports