Attach A Res Med Passover Humidifier - ResMed S8 Escape User Manual

A
TTACH A
Please refer to the illustrations in section J of the illustration sheet.
To connect your
21" (52 cm) air tubing.
1
Fill the
6'6" (2 m) air tubing (J-1).
2
Place the
medium air tubing to the air outlet (J-3).
Note: To avoid water spilling into the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (J-4).
4
Connect the power cord to the socket at the rear of the
end into a power outlet.
Please refer to the ResMed Passover User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
S8 E
The
14
R M P
ES ED ASSOVER
S8 E
SCAPE
P with water and connect the medium 21" (52 cm) and long
ASSOVER
S8 E on top of the
SCAPE
is now ready for use with the
SCAPE
H
UMIDIFIER
to a ResMed P
ASSOVER
P (J-2) and connect the free end of the
ASSOVER
S8 E , do not place it underneath the
SCAPE
P
ASSOVER
humidifier you need medium sized
S8 E and plug the other
SCAPE
.