Table of Contents
Advertisement
SCAN:MODE
Parameters
Comments
Example
SCAN:MODE?
Example
52
HP E1366A/E1367A RF Multiplexers Command Reference
[ROUTe:]SCAN:MODE NONE | VOLT | RES | FRES
the RF multiplexers.
NONE
operation. With
FRES
, the switch is set for "paired-channel" scanning.
That is, when a channel in bank 0 is closed, the associated channel in bank 1
is simultaneously closed.
Parameter Name
NONE | VOLT |
RES | FRES
Order of Command Execution: The
command must be executed before the
command.
FRES
Mode Description: With
automatically closes the paired channel in bank 1. For example, with
FRES
, closing channel 00 also simultaneously closes channel 10,
closing channel 01 closes channel 11, etc. Use only channels 00-03
for the channel_list. Specifying channels 10-13 causes an error.
*RST Condition:
Selecting Paired-Channel Scanning
TRIG:SOUR EXT
SCAN:MODE FRES
SCAN (@100:103)
INIT
[ROUTe:]SCAN:MODE?
command returns
NONE
"
the
[ROUTE:]SCAN:MODE
Query Scan Mode
Since this example selects the
command returns "FRES".
SCAN:MODE FRES
SCAN:MODE?
,
VOLT
, and
RES
have no effect on multiplexer
Parameter Type
discrete
[ROUTe:]SCAN:MODE
[ROUTe:]SCAN <
FRES
, and channel closed in bank 0
ROUT:SCAN:MODE NONE
! External trigger source
! Paired-channel scanning mode
! Select channels for scanning
! Start scanning, close channels
100 and 110
returns the current state of the scan mode. The
, "VOLT
, or
"RES
"
",
"
parameter setting.
(paired-channel scanning), the query
FRES
! Selects paired-channel scanning
! Query scanning mode
sets the scan mode for
Range of Values
NONE | VOLT |
RES | FRES
channel_lis
t>
depending on
FRES
"
"
Chapter 5
Advertisement
Table of Contents
