Table of Contents
Advertisement
Using This Chapter
Multiplexer Commands
Switching Channels
Chapter 3
Using the HP E1366A/E1367A
RF Multiplexer Module
This chapter provides examples to switch multiplexer channels and to scan
multiplexer channels. As required see Chapter 4, Understanding the RF
Multiplexers, to modify the examples for your application. Also, see
Chapter 5, RF Multiplexers Command Reference, for command
information. Chapter contents are:
Multiplexer Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25
Switching Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25
Scanning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29
Table 3-1. RF Multiplexer Commands Used in Chapter 3
Command
channel_list
CLOS <
>
channel_list
OPEN <
>
TRIG:SOUR BUS |EXT |HOLD |IMM
channel_list
<
>
SCAN
INIT
Switching channels consists of closing or opening a channel. Close
channels 00-03 by connecting a channel to com 00 or close channels
10-13 by connecting a channel to com 10. Only one channel per
bank can be closed at a time.
Use
channel_list
CLOSe <
OPEN <
channel_list
(@ccnn) for a single channel, (@ccnn,ccnn,...) for two or more
channels, or (@ccnn:ccnn) for a set of channels where cc = card
number, nn = channel number.
Switching configurations include standard, matrix, and tree. See
Chapter 2 for configuration details.
Using the HP E1366A/E1367A RF Multiplexer Module
Description
Close channels
Open channels
Set scanning trigger source
Define channels to be scanned
Start scan, close first channel
to close channels
>
>
to open channels. channel_list has the form
Chapter 3
use
25
Advertisement
Table of Contents
