Connecting User Inputs - HP E1366A User Manual

Caution
Caution

Connecting User Inputs

18 Configuring the HP E1366A/E1367A RF Multiplexers
CENTER CONDUCTOR MAY SHORT TO SHIELD. Each
channel's center conductor may momentarily short to the
shield when the channel is opened or closed. Use only
resistive (50 or 75 ) or current-limited (<1 A) inputs with less
than 0.1 F total capacitance.
STATIC-SENSITIVE DEVICE. Use anti-static procedures when
removing, configuring, and installing a module. The
multiplexer modules are susceptible to static discharges. Do
not install a multiplexer without its metal shield attached.
User inputs to the RF multiplexers are made through user-supplied male BNC
connectors to the female BNC connectors on the modules. Figure 2-1 shows
the multiplexer female BNC connectors and associated channel numbers.
Figure 2-1. BNC Connector Locations
Chapter 2