Table 3-6 Internal Tests - HP SureStore 4115w User Manual

Table 3-6 Internal Tests
Test Name
Runs the VERTICAL TEST, TRANSLATE TEST, MAGAZINE IO, and DRIVE
EXERCISE MECH
IO tests. Each test is run one time per test loop.
Used by service personnel only. Do not run this test if the library contains
EXCHANGE DEMO
tape cartridges with file system data on them. This test moves randomly
chosen cartridges to random storage slot locations. This test displays FAIL if
there are no cartridges in the library or if all storage slots are full. For best results,
the library should contain as many cartridges as there are drives, plus two
additional cartridges. The transport must be empty.
Makes a combination of moves with a PASS/FAIL result. If the drives are
IO DRIVE
empty, a tape cartridge is moved from a randomly chosen full slot to a randomly
chosen drive. If the drives are full, a tape cartridge is moved from a randomly
chosen drive to a randomly chosen storage slot. It then moves the cartridge back
to its original location. This test displays FAIL if there are no cartridges in the
library or if all storage slots are full. The transport and the mailslot must be
empty.
Makes a combination of moves with a PASS/FAIL result. It moves a tape
IO MAGAZINE
cartridge from a random full slot to a random empty slot. It then moves the tape
cartridge back to its original storage slot. This test displays FAIL if there are no
cartridges in the library or if all storage slots are full. The drives, transport, and
the mailslot must be empty.
Makes a combination of moves with a PASS/FAIL result. It moves a tape
IO MAILSLOT
cartridge from a random full slot to the mailslot. It then moves the tape cartridge
back to its original storage slot. This test displays FAIL if there are no cartridges
in the library or if all storage slots are full. The drives, transport, and the mailslot
must be empty.
Functions the same as the SCSI Initialize Element Status command. This test
INVENTORY
physically scans the entire unit to determine which storage slots contain tape
CHECK
cartridges and if the drives contain cartridges. NOTE: This test will appear as
ISTAT TEST in all front panel error messages.
Translates from side to side. No tape cartridges are required.
TEST
TRANSLATE
TEST VERTICAL Moves the transport mechanism up and down the full length of the rail. Returns
PASS/FAIL. No tape cartridges are required.
Description
Operating the Library
Running an Internal Test
3-33