Table of Contents
Advertisement
7. If necessary, remove tapes from the magazine. Press the button on top of the
WARNING
Do not attempt to disable the interlocks. If the library is operating with fewer
than three magazines inserted and the door open, the user can be exposed to
Class II laser light emitted from the bar code reader.
8. Shut and lock the access door using the key lock. Make sure the door is shut
NOTE
The library INVENTORY CHECK test runs when the access door is completely
closed so that an inventory of tape bar code labels and storage slot locations can be
stored into library memory. This process takes about one minute.
magazine, then pull out the tape.
completely.
Operating the Library
Removing Tape Cartridges from the Library
3-21
Advertisement
Table of Contents
