Table of Contents
Advertisement
The following table shows connection options when there are no other peripherals.
Table 1-5
Tape Library as the Only Peripheral
Configuration
One-Drive Tape
Library
Two-Drive Library:
Daisy chained
Minimum host I/O
slots used
Two-Drive Library
Bus 1 and bus 2
connect to separate
SCSI cards
Maximum
performance
Additional card and
cable required
Step 5: Set the SCSI Interface Mode Switch
Cabling
Single-ended SCSI
connection
Single-ended
SCSI connection
shown
Differential SCSI
connection shown
Installing the Tape Library
Mode Switch Settings
1-21
Advertisement
Table of Contents
