Table 3-5 Information Logs - HP SureStore 4115w User Manual

Table 3-5 Information Logs
Log Name
REVISION
LIB ODOMETERS *
DRIVE LOADS *
DRIVE FW *
INTERFACE FW *
Displays the library's firmware revision number.
Press to select the odometer logs.
ENTER
Number of operation hours (time during which power was
HOURS #
on). Some time may have been spent in power reduction
mode.
Total number of moves and move attempts by the
MOVES #
cartridge transport mechanism.
XLATES # Total number of cartridge transport mechanism horizontal
moves.
Press to select the logs described in the next few rows.
ENTER
Number of tape cartridge loads for drive 1.
DRIVE 1
Number of tape cartridge loads for drive 2 (two drive
DRIVE 2
library only).
Press to select the firmware revision of the drive you want to see.
ENTER
D1
REVISION # Firmware revision of drive 1.
D2
REVISION # Firmware revision of drive 2 (two drive library only).
Press to select the Interface board revision.
ENTER
BUS NUM = Press
NEXT
select, then view:
FAST WIDE
Displays the interface type.
SCSI
8052
Rev # Displays the 8052 firmware.
8052 CKSUM # Displays the 8052 checksum revision.
COBRA REV# Displays the revision of the interface chip (Cobra).
Retrieving Performance Information
Description
or to display the interface bus number to
PREV
Operating the Library
3-29