Garmin G3X Touch Pilot's Manual page 68

Flight Instruments
Maximum
recorded
G load
Minimum
recorded
G load
HSI ORIENTATION
The HSI may be configured to provide directional information in either 'Heading' or
'Auto Trk/Hdg' "Track-up" modes. Selecting Heading Mode orients the HSI to display
aircraft heading in a conventional manner with heading shown at the top of the
compass card as indicated by the lubber line. In 'Auto Trk/Hdg' "Track-up" mode, the
aircraft symbol and lubber line move to indicate heading and wind correction while
ground track in shown at the top of the compass card. While in 'Auto Trk/Hdg' the HSI
will remain heading-based when the aircraft is on the ground or when the autopilot
is in HDG mode. Refer to the G3X Touch installation manual for more information on
configuring the HSI Orientation.
Changing HSI orientation:
1) With the full screen PFD displayed, press the MENU Key.
2) Touch More Options.
3) Touch
options.
4) Touch Heading or Auto Trk/Hdg.
50
in the HSI Orientation field to display the HSI Orientation
Garmin G3X Touch Pilot's Guide
G-meter
G-meter
pointer
190-01754-00 Rev. A