Garmin G3X Touch Pilot's Manual page 192

Hazard Avoidance
F id d
light
The Flight IDs of other aircraft (when available) can be displayed on the Traffic Page.
When a Flight ID or call sign is received, it will appear below the corresponding traffic
symbol when enabled.
Identification (tail
number or Flight
ID number)
Traffic Absolute
Motion Vector
Enabling/Disabling Flight ID Display:
1) From the Traffic Page, press the MENU Key.
2) Touch the Flight ID.
M v
otion eCtorS
There are two pilot-selectable and mutually exclusive types of motion vectors, Absolute
and TargetTrend, which are differentiated by color and function. Absolute vectors are
white and indicate ground track as reported by the traffic. TargetTrend vectors are green
and indicate the flight path and position, relative to your aircraft, at which the traffic
will be after the passing of one of four predetermined look-ahead intervals. The end of
the TargetTrend vector indicates the traffic's predicted location relative to your predicted
location at the end of the look-ahead time. For example, if traffic is ahead of you and
traveling along the same track but at a slower rate, the motion vector would point
opposite of its indicated direction of flight showing that you are overtaking the traffic.
The TargetTrend look-ahead time interval is automatically adjusted from 30 seconds to
five minutes and corresponds to the traffic display range setting. The greater the range
setting, the longer the time interval and vise versa. Refer to the table below for more
details.
174
iSPlay
Aircraft
Example ADS-B Traffic Symbol
Garmin G3X Touch Pilot's Guide
Relative Altitude (in
this case 500 feet
above own aircraft)
Altitude Trend (up
arrow indicates
climbing, down
arrow indicates
descending)
190-01754-00 Rev. A