Documentation Survey; Obtaining Documentation, Obtaining Support, And Security Guidelines; Document Revision History; Prepare For Installation - Cisco 7301 Quick Start Manual

1

Documentation and Resources

Documentation for the Cisco 7301 router is online and orderable. For detailed hardware installation instructions, refer to the
online Cisco 7301 Installation and Configuration Guide. Refer to the following online documents for titles and links to related
documentation for installation and replacement of parts (including port adapters), regulatory compliance information, and
troubleshooting information and tools.
• All Cisco 7301 documentation—See the Cisco 7301 Internet Router Documentation Roadmap at
http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4878.htm
• Port adapter documentation—See the Cisco 7301 Router Port Adapter Documentation Roadmap at
http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4879.htm
• Troubleshooting documentation and tools—See the Cisco 7301 Internet Router Troubleshooting Documentation Roadmap
at http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4951.htm

Documentation Survey

Is Cisco documentation helpful? Click
http://forums.cisco.com/eforum/servlet/viewsflash?cmd=showform&pollid=rtgdoc01!rtgdoc to give us your feedback

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and
also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which
also lists all new and revised technical documentation at:

Document Revision History

The Document Revision History table below records technical changes to this document begininng beginning with version
OL-5341-03.
Document Version Date
OL-5341-03 August, 2005
2

Prepare for Installation

This section contains information about tools and parts, warnings, site preparation information, and information for
workbench or tabletop installation and rack-mount installation.
Warning Only trained and qualified personnel should install, replace, or service this equipment. Statement 1030
Warning Read the installation instructions before you connect the system to its power source. Statement 1004
Warning This unit is intended for installation in restricted access areas. A restricted access area is where access can only
be gained by service personnel through the use of a special tool, lock and key, or other means of security, and is
controlled by the authority responsible for the location. Statement 37
2
here or go to
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Change Summary
This is the third version of this document.