Pch Storage Configuration - Asus H-97-PRO Manual

3.6.3

PCH Storage Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Scroll down to display the other BIOS items.
SATA Express (SATAEXPRESS) and M.2 Configuration [Auto]
This item allows you to set an automatic detection between the SATA Express devices and
M.2 devices.
[Auto]
[SATA Express] The system assigns the priority bandwidth to SATA Express
[M.2]
By default, the system detects the first priority device. The device detection priority is as
follows: PCIe M.2 > SATA Mode M.2 > PCIe SATA Express > SATA Mode SATA Express.
SATAExpress SRIS Support [Auto]
This item allows you to set the SATAExpress SRIS support.
[Auto]
[Disabled]
3-30
The system automatically detects the connected SATA Express or M.2
devices and set a higher priority to M.2 over SATA Express interface.
(SATAEXPRESS_1) interface.
The system assigns the priority bandwidth to M.2 Socket 3.
The system automatically adjust the SRIS (Separate Reference Clock
Independent Spread Spectrum Clocking Architecture) support for
connected SATA Express devices.
Select this option for ASUS RUNWAY SATA Express bridge card.
Chapter 3: BIOS setup