Pch Configuration; Pch Storage Configuration - Asus H310M-IM-A Manual

Primary Display. Configuration options: [Auto] [CPU Graphics] [PCIE] [PEG]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. Set this item to [Enabled] to
empower both integrated and discrete graphics. The iGPU shared system
memory size will be fixed at 64MB. Configuration options: [Disabled]
[Enabled]
DVMT Pre-Allocated [64M]
Allows you to select DVMT 5.0 Pre_Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device. Configuration options: [32M] [64M]
[96M] ~ [1024M]
RC6(Render Standby) [Auto]
Allows you to enable or disable render standby support. Configuration
options: [Disabled] [Auto]
PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
3.4.4 PCH Configuration
PCI Express Configuration
PCIe Speed [Auto]
Allows you to configure the PCIe speed. Configuration options: [Auto] [Gen1]
[Gen2]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Configuration options: [Disabled] [Enabled]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Configuration options: [Disabled] [Enabled]
System Time and Alarm Source [ACPI Time and Alarm Device]
Allows you to select source of system time and alarm functions.
Configuration options: [ACPI Time and Alarm Device] [Legacy RTC]
3.4.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
H310M-IM-A
3-20