Table of Contents
Advertisement
3.6.2
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
CPU - Power Management Control
This item allows you to manage and configure the CPU's power.
Intel(R) SpeedStep(tm)
This item allows more than two frequency to be supported.
Configuration options: [Auto] [Disabled] [Enabled]
Turbo Mode
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current and temperature
specification limit. Configuration options: [Disabled] [Enabled]
CPU C-states
This item allows you to set the power saving of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]
CFG Lock
This item allows you to configure MSR 0xE2[15], CFG lock bit. Configuration options:
[Disabled] [Enabled]
3.6.3
System Agent (SA) Configuration
The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor.
3.6.4
PCH Configuration
The items in this menu allow you to adjust the PCH PCI Express speed.
PCI Express Configuration
This item allows you to configure the PCI Express slots.
PCIe Speed
This item allows your system to automatically select the PCI Express port speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
3.6.5
PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Controller(s)
This item allows you to enable or disable the SATA Device. Configuration options: [Enabled]
[Disabled]
3-16
Chapter 3: BIOS Setup
Advertisement
Table of Contents
