Messages Settings: Turn on or off the Receive Messages during power up.
NOTE: By disabling the Text Message feature you will not receive any incoming messages when the
device powers up in a 4G LTE™ network. You will still receive Text Messages in 3G networks. To
receive messages when the device powers on please enable the Text Messages feature.
WPS
Select the WPS icon
Web User Interface Configuration
Accessing the Configuration Page
1.
Make sure there is a connection between your device and the client.
2.
Launch the Internet browser and enter
bar.
NOTE:
It is recommended that you use IE (7.0 or later), Firefox (15.0 or later), Opera (10.0 or later), Safari (4.0
or later), Google Chrome (10.0 or later).
3. The login page appears as follows. The following figure is only for your reference.
Login
On the Web User Interface Configuration page, input the password (please select Device Info on the LCD
screen to get the default password). Click Login to log in the device.
The Web User Interface is divided into three parts.
Index: Shows the configuration list for your device
Content: Shows the detailed configuration.
10 Confidential and Proprietary Information of ZTE CORPORATION
and press the OK Key to launch the Wi-Fi Protection Setup.
http://192.168.1.1
TM
ZTE Unite
or
http://uscc.hotspot
II User Manual
in the address