Using The Wps - Zte Z291DL User Manual

Getting Started
4. If necessary, enter the default password and click OK.
5. Your computer or other Wi-Fi enabled device will then connect to the Z291DL device.
NOTES:
• It is recommended that the battery be fully charged in order to use your Z291DL via Wi-Fi for
the first time, or connect the device to a wall outlet for power.
• Upload and download speeds may vary depending on the number of devices connected to
the Z291DL.
10

Using the WPS

If your computer or other Wi-Fi enabled device supports WPS, you don't have to input
the password manually once your WPS has been set up in your web UI. To set up, follow
these steps:
1. Log into the web UI.
2. Select Settings > Wi-Fi Settings > Basic Settings.
3. Press and hold the WPS Button for three seconds to start the Wi-Fi Protected Setup
authentication process.
4. To respond to this authentication process, enable the WPS function on the device
you wish to connect.
5. Follow the system prompts on your device to finish the connection.
11